Effects of ultrasound-assisted enzymatic hydrolysis and monosaccharides on structural,antioxidant and flavour characteristics of Maillard reaction products from sweet potato protein hydrolysates

Effects of ultrasound (US)-assisted enzymatic hydrolysis and different monosaccharides (arabinose; xylose, XY; galactose and glucose) on peptide structure, antioxidant activities and flavour characteristics of Maillard reaction products (MRP) from sweet potato protein hydrolysates were investigated. US markedly enhanced the MR progress, and USXY showed the lowest pH value of 5.04, the highest browning intensity and fluorescence intensity (P < 0.05). FTIR results revealed significant peptide structure changes in USXY, USAR and USGA compared to other samples. USXY exhibited the highest Oxygen radical absorbance capacity (ORAC) value of 109.15 µg TE/mL, followed by USGA and USAR (94.07 and 93.41 µg TE/mL), respectively (P < 0.05). USXY and USAR showed different aroma features as compared to other MRP (P < 0.05). In addition, US enhanced umami, sweetness and sourness attributes and reduced bitterness of all MRP. USXY exhibited the highest umami intensity score (7.4), followed by USGA (7.3) and USAR (7.2), respectively. Partial least square regression analysis showed that the stronger umami taste was strongly correlated to aldehydes, thiophenes, MW 1000–3000 and 500–1000 Da peptides. Thus, US-assisted enzymatic hydrolysis and MR with xylose (XY) could be a promising way to produce natural flavouring with improved antioxidant activity.     

Improvement of characteristics and freeze-thaw durability of solidified loess based on microbially induced carbonate precipitation

Bulletin of Engineering Geology and the Environment - Bio-cementation is currently applied to solidify sandy soils, but only few studies use it to cement loess soil particles. In this study, the...     

Poly(2,5-Dihydroxy-1,4-Benzoquinonyl Sulfide) As an Efficient Cathode for High-Performance Aqueous Zinc–Organic Batteries

Aqueous rechargeable zinc-ion batteries (ZIBs) have attracted considerable attention as a promising candidate for low-cost and high-safety electrochemical energy storage. However, the advancement of ZIBs is strongly hindered by the sluggish ionic diffusion and structural instability of inorganic metal oxide cathode materials during the Zn²⁺ insertion/extraction. To address these issues, a new organic host material, poly(2,5-dihydroxy-1,4-benzoquinonyl sulfide) (PDBS), has been designed and applied for zinc ion storage due to its elastic structural factors (tunable space and soft lattice). The aqueous Zn-organic batteries based on the PDBS cathode show outstanding cycling stability and rate capability. The coordination moieties (O and S) display the strong electron donor character during the discharging process and can act as the coordination arms to host Zn²⁺. Also, under the electrochemical environment, the malleable polymer structure of PDBS permits the rotation and bending of polymer chains to facilitate the insertion/extraction of Zn²⁺, manifesting the superiority and uniqueness of organic electrode materials in the polyvalent cation storage. Finally, quasi-solid-state batteries based on aqueous gel electrolyte demonstrate highly stable capacity under different bending conditions.     

Synthesis of strontium (Sr) doped hydroxyapatite (HAp) nanorods for enhanced adsorption of Cr (VI) ions from wastewater

The development of high-efficiency adsorbents for heavy metal ion removal from wastewater is highly desirable and challenging due to their synthesis complexity and low adsorption capacities. Herein, we reported the synthesis of strontium (Sr) doped hydroxyapatite (HAp) for the increased Cr (VI) adsorption. The effects of pH, temperature, and time on adsorption performances were studied. As a result, the Sr-HAp nanorods can achieve a Cr (VI) adsorption capacity of 443 mg/g, which is significantly higher than that of HAp nanorods (318 mg/g). To better understand the adsorption mechanism, the Langmuir isotherm model was established. The modeling results indicated that Langmuir monolayer chemical adsorption contributed to the efficient Cr (VI) ion removal for Sr-HAp nanorods adsorbents. The surface area and surface functional groups (O–H) contributed to the different Cr (VI) adsorption capacities between HAp and Sr-HAp.     

Room-temperature multiferroic characteristics and unique vortex domain structures of h-Yb1−xInxFeO3 solid solutions

Hexagonal rare-earth ferrites (h-RFeO₃) have attracted much scientific attention due to their room-temperature multiferroicity. However, it is still a hard job to obtain h-RFeO₃ bulk materials because of the meta-stability of such hexagonal phase, and the evaluation of room-temperature ferroelectric and magnetoelectric characteristics in such materials is also a challengeable issue. In the present work, Yb_1−xIn_xFeO₃ ceramics with the stable hexagonal structure were obtained by introducing chemical pressure, where the unique ferroelectric domain structures of sixfold vortex combined with tenfold vortex with a typical size of ~400 nm were determined. Symmetry of the present system evolved from centrosymmetric orthorhombic Pbnm (x = 0–0.4) to non-centrosymmetric hexagonal P6₃cm (x = 0.5 and 0.6) with a ferroelectric polarization up to 3.2 μC/cm², and finally to centrosymmetric hexagonal P6₃/mmc (x = 0.7 and 0.8). The Curie point decreased monotonically from 723 K to a temperature below room temperature with increasing x, and the antiferromagnetic phase transition above room temperature was determined for all compositions. Meanwhile, a large linear magnetoelectric coefficient (α_ME) up to 0.96 mV/cm Oe was obtained at room temperature, and this indicated the great application potential for magnetoelectric devices.     

Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping

Titanium and boron are simultaneously introduced into LiNi_0.8Co_0.1Mn_0.1O₂ to improve the structural stability and electrochemical performance of the material. X-ray diffraction studies reveal that Ti⁴⁺ ion replaces Li⁺ ion and reduces the cation mixing; B³⁺ ion enters the tetrahedron of the transition metal layers and enlarges the distance of the [LiO₆] layers. The co-doped sample has spherical secondary particles with elongated and enlarged primary particles, in which Ti and B elements distribute uniformly. Electrochemical studies reveal the co-doped sample has improved rate performance (183.1 mAh·g^-1 at 1 C and 155.5 mAh·g^-1 at 10 C) and cycle stability (capacity retention of 94.7% after 100 cycles at 1 C). EIS and CV disclose that Ti and B co-doping reduces charge transfer impedance and suppresses phase change of LiNi_0.8Co_0.1Mn_0.1O_2.     

Nacre-Inspired,Liquid Metal-Based Ultrasensitive Electronic Skin by Spatially Regulated Cracking Strategy

The realization of liquid metal-based wearable systems will be a milestone toward high-performance, integrated electronic skin. However, despite the revolutionary progress achieved in many other components of electronic skin, liquid metal-based flexible sensors still suffer from poor sensitivity due to the insufficient resistance change of liquid metal to deformation. Herein, a nacre-inspired architecture composed of a biphasic pattern (liquid metal with Cr/Cu underlayer) as “bricks” and strain-sensitive Ag film as “mortar” is developed, which breaks the long-standing sensitivity bottleneck of liquid metal-based electronic skin. With 2 orders of magnitude of sensitivity amplification while maintaining wide (>85%) working range, for the first time, liquid metal-based strain sensors rival the state-of-art counterparts. This liquid metal composite features spatially regulated cracking behavior. On the one hand, hard Cr cells locally modulate the strain distribution, which avoids premature cut-through cracks and prolongs the defect propagation in the adjacent Ag film. On the other hand, the separated liquid metal cells prevent unfavorable continuous liquid-metal paths and create crack-free regions during strain. Demonstrated in diverse scenarios, the proposed design concept may spark more applications of ultrasensitive liquid metal-based electronic skins, and reveals a pathway for sensor development via crack engineering.     

High power density and flexible self-powered piezoelectric nanogenerator based on solution crystallization

A flexible self-powered piezoelectric nanogenerator (FSPN) of high power density was constructed using a poly (vinylidene fluoride) (PVDF) polymer matrix based on solution crystallization. Since the solubility parameter of the N-methylpyrrolidone (NMP) was closed to that of the PVDF, the FSPNs fabricated by PVDF and NMP showed a high concentrations of β-phase and a high power density of 6.6 W/m³ together with excellent mechanical properties and transparent. In addition, the FSPN retained its excellent performance even after 2000 cycles of cantilever vibration, which hold a great potential for harvesting mechanical energy for self-powered systems and provide a simpler solution for energy collection and utilization in our actual lives.     

Template-free synthesis of novel Co3O4 micro-bundles assembled with flakes for high-performance hybrid supercapacitors

In this paper, a novel Co₃O₄ micro-bundles structure (Co₃O₄ MBs) was obtained at 120 °C after a hydrothermal reaction for 24 h and followed by an annealing treatment at 300 °C in air. The unique Co₃O₄ MBs are constructed by many adjacent flakes with 0.4 μm in thickness, and exhibit a large surface area of 81.2 m² g^?1 and a mean pore diameter of 6.14 nm, which may facilitate a sufficient contact with electrolyte and then shorten the diffusion pathway of ions. A remarkable electrochemical behavior including specific capacity of 282.3 C g^?1 at 1 A g^?1 and 205.9 C g^?1 at 10 A g^?1, and an excellent cycling performance with 74.6% capacity retention after 4000 charge-discharge process at 5 A g^?1 are achieved when the test of Co₃O₄ MBs-modified electrode is performed using three-electrode configuration. Additionally, a hybrid supercapacitor (HSC) was fabricated with the obtained Co₃O₄ MBs as positive electrode and commercial activated carbon (AC) as negative electrode. The HSC exhibits a specific capacity of 144.1 C g^?1 at 1 A g^?1 and 126.4% capacity retention after 5000 cycles at 5 A g^?1. An energy density of 38.5 W h kg^?1 can be obtained at a power density of 962.0 W kg^?1, and 29.5 W h kg^?1 is still retained at 8532.5 W kg^?1. The simple synthetic strategy can be applicable to the synthesis of other transition metal oxides with superior electrochemical performance.